Stainless Steel Pipe Fittings

Hydraulic and Instrumentation Stainless Steel Tube

Written by
Hydraulic and Instrumentation Stainless Steel Tube

Precision stainless steel tube,selected prime raw materials, cold drawn and cold rolled, tight tolerance in OD/ID clean and smooth surface on OD/ID, Withstand high pressure, no deformation after cold bending, no crack and break after flattening and flaring. widely used in the following fields:Hydraulic and instrumentations Precision mechanical engineering Automotive Industry

Producing standard Of Stainless Steel Tube:

China: GB 14975-2002,GB 14976-2002
America: ASTM A269ASTM A213
German: DIN 17458
Europe: EN 10216-5,ISO 1127

Available materials Of Stainless Steel Tube:

China: 0Cr18Ni9 / 00Cr19Ni10 / 0Cr17Ni12Mo2 / 00Cr17Ni14Mo2 / 0Cr18Ni10 Ti / 0Cr18Ni12Mo3 Ti

America: TP304 / TP304L / TP316 / TP316L / TP321 / TP316Ti / TP347

Europe: DIN/EN1.4301M / 1.4306 / 1.4401/ 1.4404 / 1.4541 / 1.4571 / 1.4550

Size range: O.D (3.18- 60.33mm) * WT (0.5-6mm)
Delivery Condition:

Pickled and annealed,O/D polished (180,240,320,400 Grit)

Tolerance Of Hydraulic and Instrumentation Stainless Steel Tube:

  • Standard
  • OD(mm)
  • WT(mm)
  • ASTM A269
  • < 38.1 ± 0.13mm
  • OD/AD < 12.7 mm +/- 15%
  • 38.1-88.9 ± 0.25mm
  • OD/AD ≥12.7 mm+/- 10%
  • EN 10216-5
  • D2 ± 1.0 % / ± 0.5 mm
  • T2 ± 12.5 % /± 0.4 mm
  • D 3 ± 0.75 % /± 0.3 mm
  • T3 ±10 % /± 0.2 mm
  • D4 ± 0.5 % /± 0.1 mm
  • T4 ± 7.5 % /± 0.15 mm
  • DIN 2391-1
  • 6-30 mm +/- 0,08mm
  • +/- 10%
  • GB 14976-2
  • (6-10) ± 0.2 mm
  • (0.5-1.0)± 0.15mm
  • (10-30) ± 0.3mm
  • (1.0-3.0) ± 14%
  • (30-50) ± 0.4mm
  • ≥ 3 +12%/-10%

Source: Zhejiang Yaang Pipe Industry Co., Limited (www.yaang.com)

Article Categories:
Steel Pipe

Leave a Comment

Your email address will not be published. Required fields are marked *