Stainless Steel Pipe Fittings

Nickel Alloys Pipes and Tubes By yaang.com

Written by
Nickel Alloys Pipes and Tubes By yaang.com

Nickel alloy tube is one of yaang Stainless Steel specialties. The addition of nickel adds unique characteristics to those alloys in which it comprises a large percentage of the element makeup. Normally, nickel content is limited to 8-11% in most 300 series stainless steels, but in the alloys below it represents a much larger percentage of the components in each respective alloy. Each of the high nickel alloys described below has unique characteristics which should be considered prior to purchase. Tube Technology can form tubing in these alloys to sizes and tolerances within our manufacturable range. All of our nickel alloy tube is seamless and cold drawn/rolling to size, and finished in bright annealing. custom manufactured to your specifications, and can be manufactured in tube lengths up to 60’. 

Grade(UNS): Austenitic Stainless Steel:

304/304L/304H(1.4301/1.4306/1.4948); 316/316L(1.4401/1.4404); 316Ti(1.4571);

321(1.4541);309S (1.4833); 310S(1.4845); 317L(1.4438)321H(1.4878); 347H (1.4550); 

Duplex Stainless Steel:

S32001, S32003, S31500, 2205(1.4462);

S32304,(1.4362);S31803,2507 (S32750),S32760(1.4501);S32101(1.4162);

Super Austenitic Stainless Steel: 904L, S30432, S31042, 6Mo (S31254, N08367) 
Nickel Base Alloys:
Alloy 20 (UNS N08020), Monel 200 (UNS 02200), Monel 400 (UNS N04400), Incoloy 800 (UNS N08800), Incoloy 800H (UNS N08810), Incoloy 800HT (UNS N08811), Incoloy 825 (UNS N08825),Inconel 600 (UNS N06600), 4J29, 4J36, GH3030, GH3039, C276 (UNS N10276)
Martensitic Stainless Steel:410(1.4006), 410S(1.4000), 420(1.4021)
Ferritic Stainless Steel:405(1.4002), 430(1.4016)

Outside Diameter: 6 – 830mm
Wall Thickness: 0.50 – 60mm
Standards(Norm): EN 10216-5DIN 17456, DIN 17458, DIN 2462, DIN 17455
GB/T14975; T14976; T13296; GB5310;
ASTM A213A269A312A511A789A790A928, A999, A1016, ASTM B161, ASTM B163, ASTM B165, ASTM B167, ASTM B338, ASTM B407, ASTM B423, ASTM B444,ASTM B619, ASTM B622, ASTM B626, ASTM B668, ASTM B677, ASTM B829
JIS G3459, JIS G3463, JIS G3446, JIS G3447, JIS G3448, JIS G3468
GOST 9940;GOST 9941;

Nickel Alloys Pipes and Tubes
Nickel Base Alloy 
Corrosion Resistance of Nickel Alloys 
Nickel Effect In Stainless Steel
2.4066 | 2.4068 | 2.4360 | 2.4600 | 2.4602 | 2.4605 | 2.4610 | 2.4619 | 2.4633 | 2.4660 | 2.4816 | 2.4851 | 2.4856 | 2.4858 |2.4889 
Chemical Composition of Hastelloy
Hastelloy B | Hastelloy B-2 | Hastelloy C-4 | Hastelloy C-22 | Hastelloy C-276 | Hastelloy X | Hastelloy G 
Incoloy 800H | Incoloy 800HT | Incoloy 825 | Incoloy 901 | Incoloy 925 | Incoloy 926 
Inconel 600 | Inconel 601 | Inconel 625 | Inconel 718 | Inconel X-750
UNS Number N1 Nickel Alloys | UNS Number N2 Nickel Alloys | UNS Number N3 Nickel Alloys
Selection of Stainless Steel and Nickel Alloys

Use of stainless steel under high temperature condition refer table
Corrosion Resistant Stainless Steel Tube
Corrosion Resistance of Stainless Steel Tubes
High Temperature Stainless Steel Tubes
High Temperature Stainless Steel Tubes
Heat resistant Stainless Steel Tubes
Welded Stainless Steel Pipe 
U-bend Stainless Steel Tubes 
Steel Tube Pipe Classification
Heat Exchanger Tubes
Duplex Stainless Steel Tubes 
Boiler Tubes, Condenser Tubes
Stainless Steel Tube Fitting
Corrugated Seamless Stainless Steel Pipe Tube
DIN 2391 Seamless Precision Steel Tubes
DIN2391 Seamless Pricision Steel Tube Tubing Tubes
Non Acid-resisting Stainless Steel Tubes
Bright Annealing Stainless Steel Tubes
Hydraulic and instrumentation tube
High Temperature-Tubes and Pipes Standards
High Temperature Property Stainless Steel

Heat Resistant Stainless Steels and Corrosion Resistant Stainless Steels-Valve Steels,Iron Baes Super alloys

Source: Zhejiang Yaang Pipe Industry Co., Limited (www.yaang.com)

Article Categories:
Steel Pipe

Leave a Comment

Your email address will not be published. Required fields are marked *