Stainless Steel Pipe Fittings

Type 410 Stainless Steel S41000 By yaang.com

Written by

Type 410 stainless steel is a hardenable martensitic stainless steel alloy. Unlike austenitic grades it can be heat treated (“quench and temper”) to generate high strength with good ductility. 410 alloy is required when strength, hardness and wear resistance is required with some corrosion resistance. 

Due to the hardening capabilities of this stainless steel, other properties and the resulting performance of this material are somewhat compromised. The alloy can only effectively be used in mildly corrosive environments. The operating temperature range is limited a) a loss of strength by over tempering at elevated temperatures and b) a loss of ductility at sub-zero temperatures. 

Type 410 stainless steel is officially a stainless steel but characteristically the material is actually a compromise of high carbon steel alloy (which promotes wear resistance) with chromium stainless steel (which promotes corrosion resistance). 

Type 410 stainless steel is ideal for use in the manufacture of highly stressed parts found in a variety of industries including petrochemical, automotive and power generation. 

Chemical Composition

UNS No Grade C Si Mn P S Cr Mo Ni N Other
S41000 410 0.08/0.15 1.00 1.50 0.040 0.030 11.5/13.5 –– 0.75 –– ––

Mechanical Properties

UNS No Grade Proof Stress
0.2% (MPa)
Tensile Strength
(MPa)
Elongation
A5 (%)
Hardness (Max)
HB HRB
S41000 410 205 450 20 217 96

Zhejiang Yaang Pipe Industry Co., Limited can supply you with high quality type 410 stainless steel worldwide – to receive a competitive quotation please  CLICK HERE  to contact us. 

Article Categories:
Stainless Steel

Leave a Comment

Your email address will not be published. Required fields are marked *